仿真1756-module問題？
設置一下1756-MODULE，槽號跟Emulate 5000 一致！如下設置：
For read/write connections:        For listen only connections:
Input Assembly Instance1           Input Assembly Instance1
Input Size2                        Input Size2
Output Assembly Instance2          Output Assembly Instance3
Output Size1                       Output Size1
Configuration Assembly Instance16  Configuration Assembly Instance16
Configuration Size0                Configuration Size0


Specify the Requested Packet Interval (RPI).
You must enter at least 50.0 ms for the RPI.  The connection will fail if the RPI is less than 50 ms.  Because this module uses the generic module profile, the default RPI is 5.0 ms.  You must change this value
請問高手For read/write connections:        For listen only connections:
Input Assembly Instance1           Input Assembly Instance1
Input Size2                        Input Size2
Output Assembly Instance2          Output Assembly Instance3
Output Size1                       Output Size1
Configuration Assembly Instance16  Configuration Assembly Instance16
Configuration Size0
這里面的Input Assembly Instance1           ，Input Size2                        ，還有下面的output，Configuration Assembly Instance16，Configuration Size0 ，里面的參數(shù)分別是什么意思？