下面是威綸通觸摸屏的宏指令本人大字體處不明白請大俠們解釋下，謝謝！

macro_command main()

short page
int current_time,setting_time
int year,month,day,hour,minute,second,temp_day,temp_hour,temp_minute,temp
int year1,month1,day1,hour1
short a,b,c,d
bool on=true,off=false,bit
                
GetData(bit, "Local HMI", RW_Bit, 40, 1)

if bit <1 then
          
return          
end if

GetData(a, "Local HMI", LW, 9022, 1)  
GetData(b, "Local HMI", LW, 9021, 1)    
GetData(c, "Local HMI", LW, 9020, 1)
GetData(d, "Local HMI", LW, 9019, 1)  
year=a
month=b
day=c
hour=d
year=year-1800
year=year*12
month=month+year

month=month*30
day=day+month

day=day*24

hour=hour+day


GetData(a, "Local HMI", RW, 0, 1)  
GetData(b, "Local HMI", RW, 1, 1)    
GetData(c, "Local HMI", RW, 2, 1)
GetData(d, "Local HMI", RW, 3, 1)  
year1=a
month1=b
day1=c
hour1=d



year1=year1-1800
year1=year1*12
month1=month1+year1

month1=month1*30
day1=day1+month1

day1=day1*24

hour1=hour1+day1


if hour>=hour1 then
    page=186
   // SetData(page, "MODBUS RTU", 4x, 300, 1)
    SetData(on, "Local HMI", LB, 100, 1)       
else if hour <hour1 then
  
  //  SetData(off, "Local HMI", LB, 100, 1)  
                        
end if  
                
end macro_command

就是hour 的值大過和等于 hour1的值，
就把 page 的值置為 186

// SetData(page, "MODBUS RTU", 4x, 300, 1)
    SetData(on, "Local HMI", LB, 100, 1)       已經(jīng)被屏蔽了，不起作用